Barn Construction Specifications

We now offer two styles of barn construction, regular post-frame with metal or wood siding and oak-framed barns with wood siding only.  Only foundation and framing is different on these barns,  the rest is the same.
 

Framing for Post-Frame Barn Construction:

Framing: 3-ply, or 4-ply glue-laminated posts, 2"x8" p.t. skirt boards, 2"x4" girts 24" o.c., double 2"x12" MSR headers, your choice of siding & roofing.

Framing and Foundation for Oak-framed Barns.

Foundation: Concrete piers (18" or 24" dia. x 36" or 42" deep) under each barn corner & partition corner

(# 3,500 concrete mix).

Framing: 6"x6" pressure treated southern yellow pine sills under each wall & partition, anchored to concrete piers using 4 1/2"x5"x3 1/2" thick angle plates with two 1/2" x 4 1/2" anchor bolts and two 4" lags.  Rough cut oak framing & braces (timber frame style)  - 4"x6" rough-cut oak posts  with 2"x4" oak girts & braces. 1"x10" white pine board & batten siding (vertical).

Other Construction Specifications:
 

First Floor: Sizes and number of stalls, tack rooms, wash stalls, aisle way, etc. specified by customer.  Wall height - 10'.  Clearance - 9' (from floor to bottom of floor joists) if hayloft floor is used.  Higher walls are available.

Stalls: Each stall comes standard with 1"x8"x4' high oak kickboards (2"x8" yellow pine T&G kickboards are optional), double between stalls with 32" high steel grill on top (powder coated black).  One 4'x7' sliding door (with matching grill) in each stall. Stall fronts come with 2"x8" T&G southern yellow pine planks with 32" powder coated steel grill inserts. One 8-lite window with heavy duty window grill is standard in the back of each stall (4'x7' Dutch door is optional).

Tack Room/Storage Room:  Comes with wooden floor (2"x6" pressure treated floor joists 16" o.c. under 3/4" T&G plywood decking).  One 36" entrance door into the aisle way and one 36" door to outside.  Stairway for hayloft is usually placed in the tack room.

Wash Stall: Open into aisle way, walls lined with 5/8" p.t. plywood (standard) or with p.t. 2"x6" T&G boards (optional).  Concrete slab is optional.

Aisle Way: Comes standard with two double sliding doors (one in each end of aisle way).  Width of the aisle way is specified by customer.  Concrete slab is optional.

Second Floor: Comes with 2"x10" spruce floor joists 16" o.c. supported by 2"x10" spruce headers with oak framing plates & wind braces in between. On open shells, when stalls are not used, posts & beams are used to support loft floor or LVL beams if clear span is desired.  3/4" T&G plywood is used for floor decking. Number of hayloft doors and windows or any other options to be used on second floor is specified by customer.

Roof: Comes standard with 2"x10" spruce ridge pole, 2"x 8" spruce rafters 16" o.c. supported with double 2"x10" spruce headers (knee walls), 4"x6" yellow pine posts spaced accordingly and with 2"x4" wind braces.  2"x6" collar ties are spaced 32' o.c.  On open shells (without stalls) or garages, if customer does not need loft, trusses (24" o.c. for shingle roof or 48" o.c. for metal roof) may be used instead of rafters.

Roofing: For roofs with shingles 7/16" O.S.B. (standard) or 1/2" plywood (optional) roof decking, 15 lbs felt paper and 30 year architectural shingles are used.  For metal roofs 2"x4" lath 24" o.c. and double-bubble insulation is used under metal.

Lean-to: Open type lean-to with 6"x6" pressure treated poles, 2"x8" spruce rafters (16" o.c.) supported by double 2"x10" spruce headers, 4"x4" yellow pine knee walls and wind braces.  Roofing is the same as barn's roofing.

Maple Grove Construction Inc - Construction Branch of MGC Companies

Copyright © 2003-2008 Maple Grove Construction, Inc.  All rights reserved.  Member of BBB

Home    |    Warranty    |    Contact Us    |    Maintenance   |    Site Map